Como colocar vinilos en paredes con gotelé

POSITIONING IN gotelé Decal

Decal for gotéele.

Vinyls gotéele

First of all we remember that it is not the same apply a vinyl on a smooth wall surface on a full drops on vinyl than just stick to the first.

This will be achieved after removing the paper transparent with a little more patience than usual note that these drops sticking on the gotéele and still not touch the surface of the wall.

By this we make it clear that applying a vinyl gotéele it is neither easy nor as fast as a smooth wall.

We first of all asked for a photo of Drop wall to see if you can or can not do, because if it is too sharp drop and nor will plant to the customer because the vinyl break.

But if it's a normal drop far we have never had problem put, that does not mean it will ever be the first.

Once the vinyl placed in the desired site, You have to catch a cloth and gently rub the vinyl so that it adheres to the wall ( Parades SMOOTH helps with a spatula) once miss this step the transparent paper fold sliding down on itself, Surely you will get the vinyl with the transparent paper and it is normal since it only rubs a minimum of the wall, which is the drop, when you pass that when you see that comes a vinyl tip the person who will be helping you take with your finger and accompany the vinyl to the wall while you keep down the paper carefully transparent. After removing the transfer and have the vinyl on the wall, vinyl pressing this mold to drop the wall with a folded cloth without rubbing .In most of the case and vinyl and ready'd already could enjoy your view, in other cases the drop is so pronounced that we apply heat to the vinyl talking and thus take the form of gout, This can be done with a hair dryer at full power and heating a couple of seconds a small area of ​​vinyl, and immediately pressing cloth before it was cool, with this we achieve that the vinyl acquires the texture of a “bubble gum” and adopt the exact shape of the drop, If you have any questions or problems during placement immediately contact us and we'll help place without any problems.

In some cases the assistance of a dryer is needed since no vinyl just pasted to drop.

If this is the case, with a hair dryer heat will give vinyl, at a distance of a foot, closest, This could damage the material ( WITH THIS'LL GET soften the vinyl and right then withdraw AND WILL GO BY PRESSING THE DRYER WITH A DROP CLOTH molding it)

After a miss these steps will have your vinyl stuck in wall gotéele.

For any questions about this topic send an email to consultas@mystickerswall.com